EPEVER SOLAR Cost CONTROLLER SETUP: TRACER AN SERIES CONTROLLE
EPEVER SOLAR Cost CONTROLLER SETUP: TRACER AN SERIES CONTROLLE
Blog Article
The EPEVER Tracer AN Sequence Photo voltaic Demand Controller is actually a remarkably efficient solar controller suitable for off-grid solar devices. According to multiphase synchronous rectification know-how, it makes sure optimized Electrical power conversion and system stability for a wide range of photovoltaic (PV) purposes.
Key Options on the EPEVER Tracer AN Collection Controller
The Tracer AN collection makes use of EPEVER Photo voltaic Demand Controller technological know-how for superior solar energy harvesting. Important characteristics contain:
Multiphase Synchronous Rectification (MSR) for enhanced Power conversion.
Superior MPPT Algorithm with >ninety nine% effectiveness.
Twin-Phase Charging for Increased battery lifetime.
Liquid crystal display Display screen with actual-time information monitoring.
Numerous Load Manage Modes such as guide and timer.
Extensive Electronic Protections against overcharging, over-discharging, short circuits, and reverse polarity.
Move-by-Move Guideline to Establishing the EPEVER Tracer AN Sequence Controller
1. Unboxing and Preparing the Controller
Ensure all elements are integrated: Tracer AN unit, temperature sensor, interaction cables, and user guide.
Confirm the product amount and voltage scores match your photo voltaic panel and battery technical specs.
two. Mounting the Demand Controller
Find a perfectly-ventilated, dry locale near the battery financial institution.
Secure the Tracer AN controller using the delivered mounting brackets.
Preserve suitable clearance for heat dissipation.
3. Wiring the Photo voltaic Demand Controller
Warning: Constantly comply with appropriate security protocols and ensure the method is driven off in advance of connecting elements.
Stage one: Hook up the battery terminals on the charge controller (positive to favourable, detrimental to damaging).
Step two: visit here Hook up the solar panel array into the PV enter terminals.
Stage three: Hook up the load terminals if using a immediate load link.
Stage four: Double-Check out all connections for polarity and tightness.
4. Configuring the Controller Options
Power on the controller by connecting the battery first.
Utilize the LCD display to navigate the configurations menu.
Configure:
Battery Sort: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Control Modes: Handbook, timer, mild control.
five. Monitoring and Details Logging
The Tracer AN Sequence supports real-time checking using the MT50 distant meter.
Info can be logged by means of the RS485 communication port using software package including Solar Station Laptop.
Remote checking is possible Together with the EPEVER WiFi module.
6. Troubleshooting Popular Troubles
Issue one: No Power Output
Test battery voltage and connections.
Verify PV panel voltage exceeds battery voltage.
Challenge 2: About-Voltage Protection
Confirm the solar array’s voltage score.
Adjust process parameters if essential.
Challenge 3: No Battery Charging
Inspect PV wiring for continuity.
Affirm MPPT settings from the menu.
Benefits of the Tracer AN Sequence with MSR Technology
The multiphase synchronous rectification technological know-how makes certain:
Greater Effectiveness: Decreased Electricity losses throughout conversion.
Improved Reliability: Steady efficiency underneath variable loads.
Longer Battery Everyday living: Reliable and accurate charging profiles.
Summary
The EPEVER Photo voltaic Demand Controller with multiphase synchronous rectification know-how is really an Extraordinary choice for optimizing solar energy technology and increasing battery everyday living. By following the above setup guidebook, people can make sure utmost efficiency and technique longevity.