EPEVER SOLAR Cost CONTROLLER SETUP: TRACER AN SERIES CONTROLLE
EPEVER SOLAR Cost CONTROLLER SETUP: TRACER AN SERIES CONTROLLE
Blog Article
The EPEVER Tracer AN Series Solar Cost Controller is a very successful photo voltaic controller made for off-grid solar techniques. Dependant on multiphase synchronous rectification engineering, it assures optimized Strength conversion and process steadiness for a variety of photovoltaic (PV) applications.
Important Functions in the EPEVER Tracer AN Sequence Controller
The Tracer AN sequence utilizes EPEVER Solar Cost Controller engineering for excellent photo voltaic Strength harvesting. Critical options involve:
Multiphase Synchronous Rectification (MSR) for enhanced Electrical power conversion.
Advanced MPPT Algorithm with >99% efficiency.
Dual-Phase Charging for Increased battery everyday living.
Liquid crystal display Display screen with authentic-time facts checking.
Numerous Load Handle Modes which includes manual and timer.
Complete Electronic Protections from overcharging, around-discharging, small circuits, and reverse polarity.
Action-by-Action Information to Organising the EPEVER Tracer AN Sequence Controller
1. Unboxing and Preparing the Controller
Ensure all factors are involved: Tracer AN device, temperature sensor, conversation cables, and user handbook.
Validate the design amount and voltage ratings match your photo voltaic panel and battery technical specs.
two. Mounting the Cost Controller
Choose a well-ventilated, dry locale near to the battery financial institution.
Secure the Tracer AN controller utilizing the furnished mounting brackets.
Keep appropriate clearance for heat dissipation.
three. Wiring the Solar Charge Controller
Warning: Generally comply with correct safety protocols and make sure the technique is powered off prior to connecting components.
Action 1: Connect the battery terminals into the cost controller (constructive to optimistic, negative to destructive).
Action 2: Join the photo voltaic panel array towards the PV enter terminals.
Phase 3: Join the load terminals if utilizing a direct load relationship.
Stage four: Double-Test all connections for polarity and tightness.
4. Configuring the Controller Configurations
Electricity within the controller by connecting the battery first.
Utilize the LCD Display screen to navigate the options menu.
Configure:
Battery Kind: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Manage Modes: Handbook, timer, gentle Manage.
five. Monitoring and Details Logging
The Tracer AN Sequence supports real-time checking using the MT50 distant meter.
Information is usually logged through visit here the RS485 communication port working with computer software such as Photo voltaic Station PC.
Distant monitoring is achievable While using the EPEVER WiFi module.
6. Troubleshooting Typical Issues
Concern 1: No Ability Output
Check out battery voltage and connections.
Verify PV panel voltage exceeds battery voltage.
Problem 2: In excess of-Voltage Security
Verify the photo voltaic array’s voltage rating.
Change method parameters if important.
Problem three: No Battery Charging
Inspect PV wiring for continuity.
Confirm MPPT configurations inside the menu.
Advantages of the Tracer AN Series with MSR Technological know-how
The multiphase synchronous rectification technological innovation ensures:
Increased Efficiency: Lowered Electrical power losses for the duration of conversion.
Increased Reliability: Steady performance beneath variable hundreds.
Lengthier Battery Lifetime: Regular and correct charging profiles.
Summary
The EPEVER Solar Demand Controller with multiphase synchronous rectification know-how is definitely an Fantastic option for optimizing solar energy generation and extending battery existence. By adhering to the above mentioned set up tutorial, users can make sure most efficiency and technique longevity.