EPEVER Photo voltaic Cost CONTROLLER Set up: TRACER AN Sequence CONTROLLE
EPEVER Photo voltaic Cost CONTROLLER Set up: TRACER AN Sequence CONTROLLE
Blog Article
The EPEVER Tracer AN Sequence Photo voltaic Demand Controller is a highly successful photo voltaic controller created for off-grid photo voltaic techniques. Based on multiphase synchronous rectification technological know-how, it ensures optimized Vitality conversion and procedure stability for an array of photovoltaic (PV) applications.
Key Features on the EPEVER Tracer AN Sequence Controller
The Tracer AN series utilizes EPEVER Photo voltaic Demand Controller technological innovation for exceptional solar Electrical power harvesting. Critical features include:
Multiphase Synchronous Rectification (MSR) for enhanced Electrical power conversion.
Innovative MPPT Algorithm with >ninety nine% effectiveness.
Twin-Phase Charging for enhanced battery everyday living.
LCD Screen with real-time facts checking.
A number of Load Management Modes which includes guide and timer.
Comprehensive Electronic Protections in opposition to overcharging, more than-discharging, brief circuits, and reverse polarity.
Stage-by-Stage Information to Creating the EPEVER Tracer AN Collection Controller
one. Unboxing and Making ready the Controller
Ensure all components are included: Tracer AN device, temperature sensor, interaction cables, and consumer guide.
Validate the product range and voltage ratings match your solar panel and battery specifications.
2. Mounting the Cost Controller
Decide on a effectively-ventilated, dry area near to the battery bank.
Protected the Tracer AN controller using the offered mounting brackets.
Preserve good clearance for warmth dissipation.
3. Wiring the Solar Cost Controller
Warning: Generally abide by proper security protocols and ensure the system is run off in advance of connecting parts.
Phase 1: Connect the battery terminals into the demand controller (positive to optimistic, detrimental to adverse).
Phase two: Link the solar panel array towards the PV enter terminals.
Action 3: Join the load terminals if utilizing a immediate load relationship.
Action four: Double-Verify all connections for polarity and tightness.
four. Configuring the Controller Settings
Energy to the controller by connecting the battery very first.
Make use of the LCD Exhibit to navigate the settings menu.
Configure:
Battery Variety: AGM, GEL, Flooded, Lithium.
Charging Parameters: Absorption voltage, float voltage.
Load Manage Modes: Handbook, timer, gentle Handle.
five. Checking and Information Logging
The Tracer AN Collection supports actual-time checking utilizing the MT50 remote meter.
Facts could be logged via the RS485 interaction port applying program for example Photo voltaic Station Personal computer.
Remote checking is feasible Using the EPEVER WiFi module.
six. Troubleshooting Typical Challenges
Concern one: No Electrical power Output
Check battery voltage and connections.
Confirm PV panel voltage exceeds battery voltage.
Issue 2: Over-Voltage Defense
Validate the solar array’s voltage ranking.
Modify procedure parameters if required.
Difficulty 3: No Battery Charging
Inspect PV wiring for continuity.
Ensure MPPT configurations from the menu.
Benefits of the Tracer AN Sequence with MSR Technologies
The multiphase synchronous rectification know-how assures:
Bigger Efficiency: Reduced Electricity losses throughout conversion.
Improved Reliability: Stable functionality less than variable loads.
Extended Battery Everyday living: Constant and correct charging profiles.
Conclusion
The EPEVER Photo voltaic Demand Controller with multiphase synchronous rectification technological innovation is an Extraordinary choice for optimizing solar energy generation and lengthening Read more battery everyday living. By pursuing the above set up manual, people can make sure greatest performance and method longevity.